Conference Info >
Poster Sessions
Poster Sessions
Two dedicated full poster sessions will be held after the oral presentation programs of the first and second conference day. Posters will be on display in the conference area, and poster contributors will be available to explain and discuss their results to interested delegates during these sessions. The poster session will include the following contributions: | ||
P.01 A High-Throughput Workflow for the Development of New Rheology Modifiers Bret Chisholm, North Dakota State University, USA | ||
| P.02 A new APEO-free Wetting Agent for Architecture Coating Jean Meng, DuPont Company, USA | ||
| P.03 Novel Copolymers of Some Trisubstituted Ethylenes with 4-Fluorostyrene Prof. Gregory Kharas, Depaul University, USA | ||
| P.05 Application of Reactive Microgels in Automotive Clear Coat Jae Kyu Min, POMIA, South Korea | ||
| P.06 Light Cured Fluoride Filled Denture-Coating Materials Nantana Jiratumnukul, Chulalongkorn University, Thailand | ||
| P.07 Water Thinnable Novel Alkyd Resins and Driers for Airdrying Coatings KamalK. K. Sengupta, Centre for Fundamental Studies for Coatings Technology., India | ||
| P.08 Sol-gel Derived Hybrid Organic-Inorganic Pretreatments for Aluminum Alloy 2 Sarjak Amin, Coatings Research Institute, Eastern Michigan University, USA | ||
| P.09 Analysis of Ni-TiO2 Nanocomposite Coating Fabricated by Different Methods Amir Sadeghi, Sahand University of technology, Iran | ||
| P.10 Eco-conscious Antimicrobial Preservation Strategies in Low VOC Coatings and Raw Materials Jon Raymond, Dow Microbial Control, US | ||
| P.11 Mechanical properties of Nano-silica Containing UV Curable Epoxy-Acrylate Javad Shayegh, Amirkabir University of Technology, Iran | ||
| P.13 Filled Sol-Gel Epoxy Based Coating for Outdoor Insulation Spiros Tzavalas, ABB, Switzerland | ||
| P.14 Crack Prevention in Soft Latex Coatings Christine M. Cardinal, University of Minnesota, USA | ||
| P.15 Novel Bio-based UV-cure Oligomers for Sustainable Coatings Applications Senthilkumar Rengasamy, Eastern Michigan University, USA | ||
| P.16 Photo-curable Oligomers from Soy Oil for Organic-Inorganic Hybrid Coatings Jigarkumar Patel, Coatings Research Institute, USA | ||
| P.17 UV Curable Coating Based on Polyester Dimethacrylates and Urethane Dimethacrylates Xiaojiang Wang, Department of Polymer Engineering, The University of Akron, USA | ||
| P.18 A Computational Tool for Thermoset Nanocomposite Development Mr. Rohan Uttarwar, Wayne State University, USA | ||
| P.21 Cool Cars on a Sunny Day Having a Green Conscience – a Contradiction? Dr. Thomas Sowade, Heubach GmbH, Germany | ||
| P.22 New Amine Hardener for Rapid Curing and Highly Chemical Resistant Coatings Charles Uzoezie, Huntsman Corporation, USA | ||
| P.25 The Influence of Micronized Functional Fillers on Coatings Performance Michael Klinar, Kärntner Montanindustrie GmbH, Austria | ||
| P.26 High Strength Colorants for POS Coatings Applications Brij Mohal, Evonik Degussa Corporation, USA | ||
| P.28 New Method for Evaluating the High-Quality Fog Protective Coatings Dr. Guillermo Mendoza-Suarez, Nova Plasma Inc., Canada | ||
| P.29 A Direct Synthesis Route to Soy-based Thiol Oligomers Zhigang Chen, North Dakota State University, USA | ||
| P.30 Design, Developement and Characterization of Self-Healing Coatings Chunlai Sun, Coatings Research Institute, Eastern Michigan University, USA | ||
| P.31 Reduction of VOC’s in Wood Stains Using Solvent Free Pigment Preparations Thomas M.Papasso, Evonik Degussa Corporations, USA | ||
Hotspots
Online Registration for Attendees
Register now for American Coatings CONFERENCE and SHOW 2010.
